Lijado a máquina

A random orbit sander moves in both a circular and orbital pattern simultaneously, which prevents cross-grain scratches and is ideal for finish sanding on flat surfaces. A belt sander uses a continuous abrasive loop for aggressive material removal and surface leveling. Most woodworking shops use both: a belt or disk sander for shaping and rough prep, then a random orbit sander for final finish work.

A dust-free sanding system connects the sander directly to a vacuum or dust extractor via a hose, capturing sanding dust at the point of creation rather than letting it become airborne. The Mirka DEROS system routes suction through a multi-hole sanding pad and a coaxial hose, dramatically reducing airborne dust and keeping your workpiece surface clean for better finish results.

For surfaced hardwood that is ready for finishing, starting at 120 grit and progressing through 150, 180, and 220 grit is a common sequence. If the wood has milling marks, tearout, or glue squeeze-out, start at 80 or 100 grit to remove them before moving to finer grits. Always sand with the grain at finer grits to eliminate cross-grain scratches.

An oscillating spindle sander uses a cylindrical drum that moves up and down while rotating, allowing it to sand inside curves, concave edges, and profiles that a flat-pad sander cannot reach. The Triton oscillating spindle sander sleeves are replacement abrasives for this type of machine, available in multiple diameters to fit different-sized drums.

A belt-disk combination sander like the Rikon 4" x 36" belt and 6" disk sander is a stationary machine that excels at end-grain work, shaping, and leveling. A portable belt sander like the Triton palm belt sander is better for working on large, assembled pieces where bringing the tool to the work is more practical than moving the workpiece.

Inspect the sanding pad regularly for tears, worn hook-and-loop backing, or clogged vacuum holes. Clogged holes reduce dust extraction and cause heat buildup that glazes both the abrasive and the workpiece. Replace the pad or install a pad protector when the backing loses its grip or the holes become blocked.

Yes, but caution is required. Use a fine grit (180 or higher) and a light, consistent touch — never park the sander in one spot. A random orbit sander is safer on veneer than a belt sander because it removes less material per pass. Test in an inconspicuous area first and check thickness frequently.

Absolutely. Sanding dust that settles back onto the workpiece can contaminate finish coats and create a grainy surface. A vacuum-ready sander captures dust before it settles, producing a cleaner workpiece and a significantly better finish. It also protects your lungs from fine wood dust.

A random orbit sander is the best starting point for most beginners — it is forgiving, versatile, and difficult to misuse on flat surfaces. A belt-disk stationary sander is also a practical early addition for shaping and end-grain work. Visit the Infinity Tools learning center for guidance on setting up a beginner shop.

Shipping options and lead times vary by item size and destination. Check the shipping policies page for current information on freight and standard shipping for larger power tool items.