Abrazaderas de palanca

Toggle clamps secure workpieces to jigs, fixtures, router tables, and other work-holding surfaces using an over-center lever that locks the arm in place under load. They are widely used in coping sleds, panel jigs, and any fixture where a repeatable, one-handed clamping action is needed.

A manual toggle clamp requires you to pre-set the spindle height to the workpiece thickness; it then locks into that fixed position. An auto-adjust toggle clamp, such as the Auto Adjust Toggle Clamps, uses a spring-loaded spindle that compensates for small thickness variations without re-setting.

Yes. The Infinity Tools T-Track Toggle Clamp Kit includes hardware for mounting toggle clamps directly to standard T-track extrusions, allowing the clamp to slide and reposition along the track. This is a common configuration for router table jigs and workbench fixtures.

The Quick Set Knob replaces the standard threaded adjustment knob on a toggle clamp spindle, allowing tool-free height adjustments with a quick turn rather than threading the spindle by hand. It is especially useful for jigs that clamp boards of slightly different thickness.

Yes. Horizontal toggle clamps apply hold-down pressure from the side and are common on push fixtures and sled jigs. Vertical toggle clamps apply downward pressure and are typical for router table jigs and drill press fixtures. The products in this collection include both orientations.

A medium-size toggle clamp, such as the Medium Toggle Clamp with Quick Set Knob, is appropriate for most coping sleds holding standard cabinet door rail stock. Heavier workpieces or wider sleds may call for a full-size clamp with a higher rated holding force.

Yes. Review current shipping timelines and policies at enfinitytools.com/pages/shipping-policies for in-stock items.

Yes. Toggle clamps mount to plywood, MDF, and other sheet goods using standard machine screws or bolts through the clamp base. Most shop-made jigs are built from 3/4" plywood with toggle clamps mounted at strategic hold-down points. Browse woodworking jig plans in the Woodworking Books & Plans collection for project inspiration.

A quick-release toggle clamp incorporates a lever or handle design that allows the clamp to be opened and closed rapidly with one hand. The Infinity Tools Quick Release Toggle Clamps are designed for production workflows where workpieces are swapped frequently.

The Infinity Tools blog covers jig-building techniques and router table setup in detail. Visit enfinitytools.com/blogs/learn for tutorials and tips on jig construction.